About Our Radon Mitigation Systems in Omaha, NE
Radon mitigation is any process or system used to reduce radon concentrations in the breathing zones of occupied buildings. The goal of a radon mitigation system is to reduce the indoor radon levels to below the Action Level of 4.0 pCi/l. A quality radon reduction (mitigation) system is often able to reduce the radon levels to below 2.0 pCi/l.
The two most common methods of radon reduction are the passive method and the active method.
With this method we will seal any obvious radon entry routes such as ground water sump pits, cracks in the basement floor and wall/floor joints, and gravel crawl spaces. The USEPA does not recommend the passive method to reduce radon levels because, by itself, sealing has not been shown to lower radon levels significantly or consistently. This method is not guaranteed to lower radon levels and is not a permanent solution.
The most common radon reduction system that we install is called a sub-slab ventilation system. This is the preferred solution for lowering elevated radon levels and it is the solution recommended by the USEPA. This system will prevent radon gas from entering the home by ventilating the radon gas from underneath the home using pipes and a fan. The sealing described in the passive method above is included in the work performed when installing the active system. The sub-slab ventilation system is guaranteed to lower the radon levels to below 4.0 pCi/l in any home. A majority of the time our systems lower the radon levels in homes to below 2.0 pCi/l.
Set up Radon Mitigation
Call our Email us today for a free Radon Mitigation quote. A qualified Radon Mitigation Professional will set up a time to go over the steps for getting a Radon Mitigation system set up in your home.The Radon Mitigation Professional will analyze the home and design a plan to successfully limit Radon entry into your home.